纵横刀组协同式马铃薯种薯切块装置设计与试验

针对马铃薯种薯切块机械化程度低的问题,设计了一种纵横刀组协同式马铃薯种薯切块装置,对其关键部件进行设计,通过对马铃薯种薯切割过程的力学分析、运动学分析和能量学分析,建立了切种能量的数学模型,确定了影响马铃薯切种效果的主要因素。以切种效率、切种合格率为评价指标,以圆盘刀半径、输送辊与圆盘刀垂直中心距、圆盘刀轴转速和夹持辊轴转速为试验因素,进行了四因素四水平正交试验。对正交试验结果进行方差和极差分析,结果表明:当圆盘刀半径为180 mm、输送辊与圆盘刀垂直中心距为190 mm、圆盘刀轴转速为115 r/min、夹持辊轴转速为56 r/min时,切种效率为74.5 kg/min,切种合格率为98.8%,满足马铃薯切种作业要求。     

Acoustic evaluation of the vertical distribution of dwarf ayu Plecoglossus altivelis altivelis in Lake Biwa

SUMMARY: The vertical distribution of dwarf ayu Plecoglossus altivelis altivelis in the pelagic waters of Lake Biwa was evaluated from June to September in 1995–97 from eight acoustic surveys using a quantitative echosounder. In each survey, echoes from a depth range of 3 m to the sea bottom were collected at a station every 2.7 s for 24 h together with measurements of vertical profiles of water temperature and chlorophyll-a. The ayu's echoes were identified using an underwater video camera. The ayu were observed near the maximum chlorophyll-a depth and above the thermocline. Their density was highest at depths of 4–11 m with 2–4 individuals/m ³ and was almost zero below 20 m. Echo signs were recorded as having a frequent duration of more than 1 h at night, whereas were of a shorter duration in the day. The fish stay in the epilimnion during the day without any clear vertical migration, but are distributed more uniformly at night. The advantages of remaining in the epilimnion are discussed in terms of food availability and predator avoidance.     

花粉管通道法转基因抗虫棉外源基因的整合方式

对花粉管通道法培育的转Bt基因抗虫棉GK19、GK22、1016、1018、1022、1025、GK5、GKsu12和SGK1进行Southern杂交分析。结果表明,目的基因能够完整整合到基因组里,HindⅢ酶切位点有可能发生甲基化或丢失。除1018以外的上述8个抗虫棉的分析结果还表明,载体骨架没有整合到棉花基因组中。     

果树自交不亲和性的遗传与生理机制及其研究

在简要介绍植物（包括果树）自交不亲和性与生理控制机制的基础上，着重对梨、苹果、杏等果树自交不亲和性的研究进行了综述，内容包括花柱内花粉管生长特点、花柱S糖蛋白的特性与作用机理以及果树自交不亲和的分子生物学研究，并提出了该领域有待研究的问题。     

Capnographic documentation of nasoesophageal and nasogastric feeding tube placement in dogs

Objective: To evaluate the ability of capnography to document proper placement of nasoesophageal (NE) and nasogastric (NG) feeding tubes. This study was conducted in 3 phases. Phase I of this study was designed in order to test the efficacy of capnography to distinguish placement of a feeding tube in the alimentary tract versus the respiratory tract. Phase II was designed in order to document that carbon dioxide (CO₂) could be measured through a polyvinyl chloride (PVC) feeding tube. Phase III was performed in order to evaluate the technique of continuous monitoring during insertion of the feeding tube into the esophagus and stomach as would be performed during a clinical‐tube placement. Design: Prospective study. Setting: Research laboratory. Animals: 24 adult dogs. Interventions: In Phase I, sedated dogs were instrumented with an intratracheal catheter and an 8 French feeding tube placed nasally into the distal esophagus and later advanced into the stomach. In Phase II, dogs were anesthetized and an 8 French feeding tube was placed down the endotracheal tube, then into the esophagus and later advanced into the stomach. In Phase III, sedated dogs were instrumented with an 8 French feeding tube inserted intranasally and then advanced to the level of the nasopharynx, distal esophagus and, lastly, the stomach. Fluoroscopy was used in order to determine location of the feeding tube. Measurements and main results: Phase I measurements included respiratory rate and CO₂ from the trachea, esophagus, and stomach and pH of gastric fluid sample. Phase II measurements included respiratory rate and CO₂ from the endotracheal tube, feeding tube in the endotracheal tube, feeding tube in the distal esophagus, and feeding tube in the stomach. Phase III data collection included respiratory rate and CO₂ as the tube was passed through the nasal cavity, nasopharynx, esophagus and stomach. Phase I fluid samples were collected from 5 of the 9 dogs and had pH values from 1.68 to 4.20. In both phases, values for the respiratory rate and CO₂ from the esophagus and stomach were 0 ± 0, significantly lower (P < 0.001) than the values from the trachea. In Phase II, there was no significant difference between the respiratory rates (P = 0.886) and CO₂ (P = 0.705) readings obtained from the endotracheal tube compared to readings from the feeding tube in the endotracheal tube. In Phase III, there was a significant difference (P < 0.001) between the respiratory rates and CO₂ readings obtained from the nasal cavity and the nasopharynx when compared to those readings obtained from the esophagus and stomach. Measurement of CO₂ and respiratory rate resulted in a reading of 0 every time the feeding tube was in the esophagus or stomach. Conclusions: Capnography may be used in order to detect airway placement of NE and NG tubes.     

钢管混凝土拱桥的施工监控技术

钢管混凝土是由混凝土填入薄壁钢管而形成的一种组合材料。在桥梁结构上,钢管混凝土主要应用于拱桥。目前,大跨度钢管混凝土拱桥主要采用缆索吊装-斜拉扣定施工新技术,拱桥的线形通过实测每节钢管拱的标高及拱轴线位置,并借助扣索实施动态调整来保证。为此,介绍了钢管混凝土拱桥施工过程的监控技术,从而指导施工,以确保拱桥建成后满足设计要求。     

苹果自花授粉的花粉管结构变化及S-RNase定位

 苹果‘红星’品种授粉处理24 h后, 自花授粉比异花授粉的花粉管生长缓慢。授粉处理48 h后, 可观察到自花授粉花柱通道组织的花粉管内有二裂粒子增加、管壁破裂和管内物质溢出、外层管壁增厚等现象。苹果气球状花期未授粉的花柱及自花和异花授粉24 h后且无花粉管存在的花柱切片显示, S-RNase位于花柱通道组织的细胞内。自花和异花授粉48 h后有花粉管通过的花柱切片显示, S-RNase位于花柱通道组织的细胞间隙和花粉管内。     

香菇烂筒病因与综合防治研究

本文通过对香菇烂筒重灾区进行生态环境、气象、植保等方面调查，应用微生物分离技术，对烂筒样品和土壤样品进行致烂菌的分离、筛选和回接试验，从中确定致烂菌菌株的分类地位和基本生物学特性，从而研制防治香菇烂筒的生态、物理和药物防治技术，提出综合治理措施。     

液下泵内部非定常流动及噪声特性

为研究液下泵内部流动的非定常特性及噪声规律,通过采用计算流体动力学软件ANSYS CFX15.0与LMS Virtual.lab声学仿真软件相结合的一种间接混合计算方法,对液下泵内部流场及其声场进行求解.在该计算方法中,对流场进行求解得到监测点的非定常压力脉动,从而获得非稳态的压力脉动频域特性规律;基于声学边界元法,对液下泵蜗壳偶极子内场噪声和叶片偶极子内场噪声进行求解,获得了边界元表面的声压级分布以及典型场点的声压频率曲线.计算结果表明:叶片扫掠过程中与蜗壳隔舌的相互作用产生较大的压力脉动,隔舌附近的噪声是流动噪声的主要噪声源;声压级在叶片通过频率及其谐频时达到极大值,随频率的增大,声压级极大值都呈现衰减状态.研究结果可为液下泵的后续降噪分析提供一定的理论基础.     

卧式泵站直管式出水流道型线变化水力性能数值模拟

基于不可压缩流体的连续性方程和雷诺时均N-S方程,采用CFD技术对卧式泵站直管式出水流道进行数值模拟计算,通过改变出水流道型线,分析出水流道内部流动特性及水力损失影响。研究表明,出水流道当断面形状设计为圆变方,在平面方向和立面方向均逐渐扩大的形式时,流道内流态最好;将进水流道断面在平面方向设计为先扩散后平直,而在立面方向均匀扩大的形式时,流态较好;而将断面在立面与平面方向均设计成先扩散后平直时,出水流道流态最差。